RV02E混料机混匀炼钢污泥等辅料的试验研究

借鉴高速粉碎机和强力混匀机高速、逆流的剪切、分散原理,采用RV02E高速、强力混料试验机对炼钢污泥、氧化铁皮、除尘粉等辅料进行了混料和球团试验,取得了良好的分散和混匀效果,生球和成品球质量明显好于普通混料球团。该工艺可解决目前炼钢污泥等辅料在球团生产使用过程中存在的一些问题,提高了炼钢污泥配比,有显著的经济、社会效益和推广价值。     

双转子连续混炼机制备插层型聚乙烯/有机蒙脱土纳米复合材料的研究

借助双转子连续混炼机,通过直接熔融插层法制备了聚乙烯/有机蒙脱土纳米复合材料,并用XRD测试了有机蒙脱土的层间距。分析了不同转子转速和喂料速率对聚乙烯有机蒙脱土复合材料层间距及其力学性能的影响。结果表明,选择适当的操作工艺以获得合适的剪切强度对于制备插层型聚乙烯有机蒙脱土纳米复合材料极为重要,当转子转速为400r/min,喂料速率为1.35kg/h时,制得的聚乙烯/有机蒙脱土复合材料层间距最大,插层效果最佳,有机蒙脱土的增强与增韧效果最好。     

一种基于匹配跟踪的谐波和独立谱线正弦模型实现方案

该文基于匹配跟踪的谐波和独立谱线正弦模型提出了一种用于参数音频编码的实现方案,输入音频信号的正弦成分由谐波联合独立谱线共同表示,分析合成过程采用50%叠接相加(OLA)消除帧间不连续,匹配跟踪(MP)算法在频域提取模型参数(幅度、频率和相位)大大降低运算复杂度。谐波谱线基频由谐波积谱法(SHS)获得,各次谐波频点确切位置借助MP迭代过程推出,并进行二次曲线拟合,对应的谐波幅度采用LPC谱包络近似。独立谱线的提取有效弥补了谐波提取不足。实验证明该文提出的正弦模型实现方案可以很好地表示出音频信号中的平稳成分,并对低比特率的参数音频编码有一定的借鉴性。     

用VOLTERRA 级数精确分析 MESFET 功率放大器的副谐波负载牵引特性

为了分析CDMA类宽带信号激励下MESFET功放的副谐波负载牵引特性,推导了一组基于MESFET非线性模型的功放电路Volterra转移函数解析式,利用此解析式,建立了三阶交调分量与副谐波负载的解析关系,分析了不同副谐波负载情况下副谐波牵引特性;并推导出了最优副谐波负载的表达式。该文还从两个三阶交调幅度的差异着手,证明了电抗性副谐波负载是造成这一差异的主要因素,上述推导得到的结果与采用ADS软件谐波平衡法仿真得到的结果吻合得很好。     

美国法雷尔F370密炼机的特点和问题

介绍进口设备F370密炼机生产线的特点，并结合现场实际使用经验，对该设备存在的主要问题进行分析。为制定解决办法和改造方案提供分析依据。     

混频器设计中的关键技术研究

混频器已经在诸多领域中得到了广泛的应用,其技术指标的好坏直接影响到整机性能的发挥。从混频器的基本概念出发,分析了混频器设计中的关键技术,如噪声系数、变频损耗、动态范围、隔离度、混频失真等对接收机性能的影响,并从工程角度出发,指出在工程设计中应注意的要点。本文所得结论在工程应用中得到了验证。     

一种基于像素自适应仲裁的OSD分层混合结构设计

数据混合是OSD分层显示的关键技术之一.本文基于OSD的分层结构及数据组织结构特点,提出一种OSD分层显示的单混合结构,该结构采用基于像素自适应仲裁的策略,按照层优先级次序,对多个OSD图层信号实时地切换显示.FPGA验证结果表明,该结构在满足OSD分层混合显示、实现菜单选择鼠标控制等高级人机对话功能的前提下,其硬件资源开销比多混合结构节省约33%以上,且具有良好的层次可扩展性和操作灵活性.     

混铁炉综合炉衬技术开发及应用

文中论述了混铁炉采用综合炉衬技术并通过实际应用有效地延长了混铁炉的寿命。炼钢厂混铁炉内衬采用综合炉衬技术，是钢铁厂降本增效的有效措施。     

QL-2B型防冻剂在大庆龙虎泡取水泵站工程中的应用

取水泵站工程采取掺加适宜的QL-2B型防冻剂，另外以对砂、水加热。解决了在-15℃气温下砼施工问题，既保证了工期又保证了砼质量。     

Mixing of solids in different mixing devices

Mixing of powders is a common operation in any industry. Most powders are known to be cohesive, many agglomerate spontaneously when exposed to humid atmosphere or elevated storage temperature. Agitation of the powder (especially powders with different bulk densities) may result in migration of smaller particles downwards and of larger ones upwards. Another problem is segregation whose main cause is the difference in particle size, density shape and resilience. There are standard mixing devices, such as drum tumblers or Turbula mixers. Alternate device type used is the static mixer of Kenics type. Static mixers save energy, disable segregation and effect particle migration. In this paper, static mixers, as devices for powder mixing, are tested as well as Turbula and V-shaped drum mixer, since those devices are commonly used for powder blending in industry. Mixtures that were blended by means of those three devices were made out of the model material, quartz sand, in different component ratios (20:80 and 30:70). The results were statistically calculated and graphically presented. Cohesion indexes were measured with Powder Flow Analyser to see the effect of material flow on the mixture quality. The results obtained by those three devices, the particle size effect and cohesion indexes, bring us to the conclusion that static mixers could be used for mixing of powders, but their shape, number of mixing elements and the mixer length should be adapted for each mixture separately, experimentally and mathematically, through modelling of the system.